+---------------------------------------------+
|              mViewer GX Creator             |
|  for the TI-89 / TI-92 Plus / TI-Voyage 200 |
|         by Xavier (Critor) Andreani         |
| http://tiplanet.org/forum/editgx.php?mode=9 |
+---------------------------------------------+

Thank you for creating your calculator document on TIPlanet.org.



A) Installing the calculator on the computer :  (skip to B if already performed)
   -----------------------------------------
You need a specific software to put the files on the calculator.
For example, TI-Connect 4.0 :
http://tiplanet.org/forum/archives_voir.php?id=12443 (for Windows)
http://tiplanet.org/forum/archives_voir.php?id=11569 (for Mac)


B) Installing the viewer on the calculator :  (skip to C if already performed)
   ---------------------------------------
You need a compatible software to read the files on the calculator.
For example, TICTEXPV 1.03 :
http://tiplanet.org/forum/archives_voir.php?id=28361

Send :
- the 'tictexpv.89p' file to your TI-89
- the 'tictexpv.9xp' or 'tictexpv.v2p' file to your TI-92 Plus or TI-Voyage 200


C) Sending the files to the calculator :
   -----------------------------------
Send all attached '.89e', '.9xe' or '.v2e' files to your calculator.


D) Reading the files on the calculator :
   -----------------------------------
Run the 'tictexpv' program and choose the file to display :
- arrow keys to scroll
- [ESC] to quit

If the text is hardly readable, you can adjust the contrast by pressing [+] or [-] while holding the diamond key.



For support :
http://tiplanet.org