Phoenix 2.0 for TI-82/83/85/86 by Patrick Davidson - Internal Documentation                

This is the internal documentation for the game Phoenix.  For information
on using the game, see the file 'PHOENIX.TXT'.  This document explains the
internal workings of the program.  It is mainly intended for people who
want to modify the game.

Since there is now a flexible external level format, there will probably
be fewer reasons why anyone should modify the game, but of course you
still can do so.  For information on designing external levels, refer
to 'LEVELS.TXT'.

This file is not yet complete; internal interfaces and data structures are
not yet described in it.  However, the introduction and description of the
build process which produces code for all 5 calculators from a single set of
source files.

 _____________________________________ Table of Contents

 1. Introduction ..................................................... 26
 2. Build process and compatibility system ........................... 59
 3. General program flow ............................................ 126
 4. Data structures ................................................. 173
 5. File-by-file description ........................................ 181

 _____________________________________ Introduction

Phoenix is free/open source software.  This means that everyone is allowed
to develop modified versions of the game.  Phoenix is now in the public
domain, so it may be used in any way without restrictions.

I chose this for the simple reason of trying to maximize the usefulness of
the program.  This provides many benefits, such as:

1) Allowing people who want to have a slightly different game to make it
   themselves with a minimum of effort.
2) Allowing intermediately-skilled programmers to learn from the design
   of the game.
3) Allowing the more advanced programmers to develop substantially different
   games based on this one more easily than writing new games from scratch.
4) Allowing the program to continue even if I stop supporting it myself.
                           
However, even though several people have talked to me about making such
modified games, nobody has actually released one yet.  To try to make it
easier for people to do that, I am releasing this document which describes
the internals of the game, and have also added many additional comments to
the code itself.

This document only provides an overview of the working of the game.  More
detailed information about specific functions is present in the comments of
the source files themselves.  (That is, it hopefully will be when/if I get
around to putting in more complete comments).

This document assumes that the reader has at least basic familiarity with
programming the Z80-based calculators in assembly.  If you are a complete
beginner, this is probably not the best resource for learning to program the
calculators.

 ______________________________________ Build process and compatibility

Beginning with version 0.95, the cross-calculator compatibility has been
changed to a simpler method that no longer requires running a
conversion program at any point.

All five versions of the program are built from more or less the same set of
source files.  To allow this to work, each different calculator has its own
"main" program file which includes initialization, address definitions, and
library routines specific to that calculator.  In addition, files dealing
directly with the display have two versions; one for the narrow-screen
calculators (82, 83, and 83+) and one for the wide-screen calculators (85 and
86).  There is also conditional code in some places.

Batch file to automatically build each version are included.  The files
with names "build8?.bat" build the version specifically for that calculator;
the 'build.bat' file automatically builds all versions, and deletes the
temporary files.  Additionally, each build script will automatically make
the full distribution archive, containing all files needed to distribute
with the game (that is, the executable, documentation, and source code).
The TI-86 build file also calls Lite86 to compress the executable, although
this step is not necessary.

The 'main8?.asm' files are the main source files for each calculator.
For the files that have separate versions depending on screen width, the
narrow-screen version's name ends in 12 (because the screen is 12 bytes wide
for them) and the wide-screen version has a name ending in 16 (because those
screens are 16 bytes wide).

The program should be built from the main directory as all include
directives expect files to be included from that subdirectory.  Standard
include files (that is, stuff like "usgard.h", "ion.inc", etc.) should also
be in this directory.  You will also need to install the standard build
tools for each calculator you want to assemble Phoenix for, and make sure
that the utilities and batch files normally used to compile with them are in
your path.

The program uses TI-85 style names for RAM addresses and ROM routines.  For
the TI-86 and Ion, where different naming is normally used, I have added
new equates in those calculators' main files to make the TI-85 names work.

There are two special considerations needed to keep things compatible across
calculators, in addition to obvious differences between the calculators.
One of these is relocation.  Everywhere but the TI-85 (Usgard) the program
is copied to a constant address by the system.  Usgard normally uses a more
complex relocation system with a table of internal references to adjust
pointers to point to the correct address.  However, this is not used for
Phoenix (from version 1.0 on); instead, the initialization moves the code to
a constant address.  Thus you can use normal absolute addressed references,
without having to worry about using R_ or & as you otherwise would when
programming for Usgard.

The other problem is with ROM calls.  On many calculators, ROM calls can be
made just by a call to an address.  However, for Ion, "bcall" msut be used
for many calls, and some calls must use ROM_CALL under Crash.  The solution
to this is to use ROM_CALL for all calls where it will be needed on any
calculator; for the calculators where a simple call can be used, ROM_CALL
will be a macro that expands to a simple call, while it expands to the other
needed form on the calculators that require that.  So, ROM_CALL should be
used for all functions except a few simple ones like CP_HL_DE, LD_HL_MHL, and
GET_KEY where even the TI-82 does not need ROM_CALL.  Of course, even some
of these simple functions need a "bcall" in Ion, so for them I wrote small
routines that either do the bcall, or just do the function, to avoid trouble
(for small things like CP_HL_DE and LD_HL_MHL that are called often, this
also avoids the slowdown of a "bcall" on the TI-83+).  Also, ROM_CALL is
defined to expand to a bcall under Ion, so you just use ROM_CALL everywhere.

_______________________________________ General program flow

0. On the TI-85 or TI-86, an external level file is run to play it.  The
   file writes the level data to a constant address, and then runs the
   main program.

1. Calculator-specific initialization.  This usually involves setting
   system flags, and also includes moving the program to a constant
   address.

2. The interrupt is initialized, and (on the TI-85 or TI-86) the screen
   side data is initialized.

3. A saved game is checked for.  If found, the game will try to load its
   level, and fail if it can't.  On the TI-85 or TI-86, this check
   verifies that the level in memory (that you ran to start the game) is
   the correct one; for the Ion version, it searches memory for the level.
   Of course, if you used the internal levels this is much simpler.  Once
   the level is loaded the main loop is started.

4. Initialize some variables for a new game, and put default images in
   addresses indicating images.

5. Check for an external level on TI-85 or TI-86, or display level selector
   if using the Ion version.  The level address variables are set to
   whatever level is chosen, and external level identification is also put
   in the game data area (to identify it if you restore).  Note that an
   external level is always moved to a constant address, so pointers within
   it can be saved without problems.

6. Display the title screen, where the user can choose the speed and the
   diffiulty level.

7. Then the game actually plays.  The main loop (slightly different in the
   narrow and wide screen versions) does everything for the game play.
   Gameplay is always synchronized to the timer interrupt, with the exact
   number of interrupts between frames depending on the speed selection.

8. When no enemies remain, the main loop calls the level loader, which uses
   the level data to set up the new enemies.  The "shop" is a special level
   with no enemies that you finish immediately (after doing the shop stuff,
   which is run from the level loader).

9. The end of the game is also a special level, from which the high scores
   are displayed, and you can possibly enter the table.  This level just
   resets the level number to 0 so you can restart afterwards.

_______________________________________ Data structures

For enemies, enemy bullets, and player bullets, simple arrays are used.
These contain one object structure after another.  The defintions
of these are contained in phoenixz.i.

(more information coming soon ... maybe)

_______________________________________ File-by-file description

(coming soon ... maybe)