/\  /\  /\  /\  /\
  / \\/ / / / / / / /
 / \\\ / / / / / / /
/ /\\ /  \/\/ /\/ /
\/  \/    \__/\__/ ALPHA

I. Installation

Requirements : 	•2 to 16 calcs, from TI-83+ (SE) to TI-84+ (SE)(Pocket)
		•a customized TI-TI cable

Simply send NETWIRE.8xp to your calcs. If you fear RAM Cleared, send NWDEBUG.8xp too (mainly on master calc).

For custom cable, see below.


II. Using

Link all calcs together (see below).
Run Asm(prgmNETWIRE on each calc, and then choose one calc to become the master : simply press [MODE]. It will show the number of detected calcs. When OK, press [ALPHA]. After a few seconds, all calcs should display a succeed message and an ID number, normally different on each calc.

III. Troubles

If some calcs seem frozen, run Asm(prgmNWDEBUG and play with keys F1 and/or F5, it should solve main freezes.

IV. Cable

The best thing you could do is to link some 2.5 stereo male jacks on an electronic breadboard for dev, with mass to mass, data to data and clock to clock.

If you don't understand my explanations/english, just take 2 calcs and a simply TI-TI cable.

V. Contact

If you have bugs with ID numbers, or freezes on some calc, please E-mail me at zero44@laposte.net