sad
DownloadTélécharger
Actions
Vote :
ScreenshotAperçu
Informations
Catégorie :Category: nCreator TI-Nspire
Auteur Author: Sikiminbasi
Type : Classeur 3.0.1
Page(s) : 1
Taille Size: 1.65 Ko KB
Mis en ligne Uploaded: 13/12/2024 - 22:42:15
Uploadeur Uploader: Sikiminbasi (Profil)
Téléchargements Downloads: 2
Visibilité Visibility: Archive publique
Shortlink : http://ti-pla.net/a4404895
Type : Classeur 3.0.1
Page(s) : 1
Taille Size: 1.65 Ko KB
Mis en ligne Uploaded: 13/12/2024 - 22:42:15
Uploadeur Uploader: Sikiminbasi (Profil)
Téléchargements Downloads: 2
Visibilité Visibility: Archive publique
Shortlink : http://ti-pla.net/a4404895
Description
Fichier Nspire généré sur TI-Planet.org.
Compatible OS 3.0 et ultérieurs.
<<
A complex transducer may have several sensing parts Often the measurement signals go through one or more converters before it can be read by the controller In addition, filtering may be needed to remove the noise from the quantity measurement signal. Signal processign is needed in different parts of the control system: Between the transducer and controller as well as between the controller and the actuator. For example. Charge, lock, power and switching converters, linear and PWM-converters etc. Various signal filters According the conversions, most of the transducers require their own power supplies the transducers may be classified into active or passive, depending upon the need for external power. The passive types dont necessarily need external power source They may take their power from the measurement signal They may influence into the measured quantity more than the active transducers. For example thermomenters, radiation sensors, piezoelectric sensors and sensors measuring the light. Simpler, more reliable and cheaper. To form the output an active transducer needs electrical power For example. potentiometer, that needs to input electrical power into its resistance to create an aoutput Made with nCreator - tiplanet.org
>>
Compatible OS 3.0 et ultérieurs.
<<
A complex transducer may have several sensing parts Often the measurement signals go through one or more converters before it can be read by the controller In addition, filtering may be needed to remove the noise from the quantity measurement signal. Signal processign is needed in different parts of the control system: Between the transducer and controller as well as between the controller and the actuator. For example. Charge, lock, power and switching converters, linear and PWM-converters etc. Various signal filters According the conversions, most of the transducers require their own power supplies the transducers may be classified into active or passive, depending upon the need for external power. The passive types dont necessarily need external power source They may take their power from the measurement signal They may influence into the measured quantity more than the active transducers. For example thermomenters, radiation sensors, piezoelectric sensors and sensors measuring the light. Simpler, more reliable and cheaper. To form the output an active transducer needs electrical power For example. potentiometer, that needs to input electrical power into its resistance to create an aoutput Made with nCreator - tiplanet.org
>>
