TicTexpv "Address Error"

→ **MyCalcs** profile · by **bruno costa** » 20 Feb 2014, 22:10

Hello friends,

I install the Tictexpv in my V200 and when i´m going to run it, appears the message "Address Error"

I already reset the calculater and install again but the problem continues...

Can you help me?

Thanks

→ **MyCalcs** profile · by **Bisam** » 20 Feb 2014, 22:56

Try sending the OS from your computer to your calc.
Your calc should get back a normal state.

If you think this program (Tictexpv) is the origin of the problem... just don't use it again.
I don't know it, so I can't help you about it !

→ **MyCalcs** profile · by **bruno costa** » 20 Feb 2014, 23:05

I already Install the most recent OS...

Then install again the Tictexpv, but did´t run and it always run so far...

The problem is that this program is very usefull for me to send documents to calculater..

Thanks for reply me

→ **MyCalcs** profile · by **Bisam** » 20 Feb 2014, 23:20

Which calc do you have ? (You should update your profile...)

It may need to be a little tweaked to accept running some Assembly programs as this one.

You could for example install PreOS (even if you don't need it).
At first installation, it will do the necessary tweaks and you won't be bothered anymore with that.
It will also prevent some crashes, once installed...

But you can uninstall right after installng it if you please.

→ **MyCalcs** profile · by **bruno costa** » 20 Feb 2014, 23:38

Sorry, I´m updating now...

I have a Voyage 200.

What is PreOS?

→ **MyCalcs** profile · by **Bisam** » 20 Feb 2014, 23:58

PreOS is a so-called "kernel". It's used by some assembly programs which need such a program.
You can find it by using the "search" field...

→ **MyCalcs** profile · by **bruno costa** » 21 Feb 2014, 00:01

So you sugest me to install "Kernel" and then install the programs?

→ **MyCalcs** profile · by **critor** » 21 Feb 2014, 00:40

TICTEXPV doesn't need you to install a shell/kernel.

But you can still try.

→ **MyCalcs** profile · by **bruno costa** » 21 Feb 2014, 00:48

I Tried but still doesn´t work...

→ **MyCalcs** profile · by **Lionel Debroux** » 21 Feb 2014, 08:57

@Bisam: tictexpv is the main program for reading files generated by mViewer GX Creator 68k

PreOS is useless for tictexpv (or any other TICT program, in fact).

@bruno costa: does the Address Error occur even if the calculator contains no files suitable for tictexpv ?

No Address Error occurred for me before releasing the new build, otherwise it wouldn't have been released.