[FR/EN] Comment transformer sa TI-Nspire (CX) en CAS !

[syner-g]

Donc pour profiter de mviewer, je n'ai d'autres solutions que de passer en OS non-CAS ?

Refaire la manip complète avec le Switch 3.1/3.6 me permettrais de récupérer ndless en 3.1 d'après la version de l'OS switché ?

[critor]

En effet, le switch 3.1/3.6 a l'avantage, en version 3.1, d'offrir simultanément Ndless et le CAS.
Ce qui donne moins d'occasions de switcher.

[syner-g]

Je pense que, en attendant une nouveauté, ce sera mon choix pour le moment ^^.
Pour annuler la manip précédente, une simple installation d'un OS CX ( comme le 3.6 en début de tuto ) remet tout a zéro ?

[con5tant]

Hello, sorry but I only speak English, my Ti-Nspire CX has the following: P-0511B
Does that mean I can do this mod?

Also, the OS I have is 3.1.0.392. Do I need to update the OS?

Thank you.

[Bisam]

1) No need to upgrade
2) Use Ndless 3.1 and follow the tutorial (it is also available in english !)

[con5tant]

Thank you for your reply!

Do you mean nLaunchy 3.1/3.6 switching pack: archives_voir.php?id=21229? Or install Ndless 3.1 first then this?
Then skip step A of the tutorial here? Step A says OS should be 3.6

[Levak]

Thank you for your reply!

Do you mean nLaunchy 3.1/3.6 switching pack: http://tiplanet.org/forum/archives_voir.php?id=21229? Or install Ndless 3.1 first then this?

Yes, indeed, Nlaunch(y) doesn't need Ndless to work, but since Ndless 3.6 is not rebootprof, combining it with Nlaunch makes it reboot proof. On the other hand, Ndless 3.1 is reboot proof, but you need to install it via Nlaunch if you're using Nlaunch to install an OS.

Does it make sense ? Hard to explain this...

[con5tant]

Thank you for your reply!

Do you mean nLaunchy 3.1/3.6 switching pack: archives_voir.php?id=21229? Or install Ndless 3.1 first then this?

Yes, indeed, Nlaunch(y) doesn't need Ndless to work, but since Ndless 3.6 is not rebootprof, combining it with Nlaunch makes it reboot proof. On the other hand, Ndless 3.1 is reboot proof, but you need to install it via Nlaunch if you're using Nlaunch to install an OS.

Does it make sense ? Hard to explain this...

Kind of..so I should install Ndless 3.1 first then install nLauchy 3.1. Or the other way around

[Lionel Debroux]

nLaunchy's README describes the procedure
You need to transfer the Ndless resources, but not Ndless' crafted OS update, as you'd have to erase it for installing nLaunchy anyway.

[con5tant]

Ok, it seems that I have installed everything...but the CAS functions are not there!