[removed]

→ **MyCalcs** profile · by **critor** » 02 Feb 2017, 22:27

That's what I was thinking - an Nlaunchy update is going to be needed too.

→ **MyCalcs** profile · by **parrotgeek1** » 02 Feb 2017, 22:33

→ **MyCalcs** profile · by **critor** » 02 Feb 2017, 22:37

The problem is not only with the installation.
Boot2 does also check the CAS/non-CAS types each time it loads an OS, so on every reboot.

→ **MyCalcs** profile · by **parrotgeek1** » 02 Feb 2017, 22:44

→ **MyCalcs** profile · by **critor** » 02 Feb 2017, 22:51

Patching every 3.6+ version would be better - but it's your decision as you're the one working on them.

A 4.2 patch for example would still be interesting, as :
- OS 4.2 is much smaller than 4.4 and thus is using much less RAM
- Ndless 4.2 can be considered as perfectly stable, since it's been used for months

I don't have time to test/improve your 4.4 patches for now.
Are all of them absolutely needed or did you just patch every reference ?
Because the place in Boot2 4.0.3 in which ControlX is injecting the OS patcher together with its patches is quite small, just a little more than 900 bytes for all supported OS versions.
And the Ndless installers have to fit in this same place too...

→ **MyCalcs** profile · by **parrotgeek1** » 02 Feb 2017, 23:01

→ **MyCalcs** profile · by **Bisam** » 02 Feb 2017, 23:48

Cool !
I may finally update my calc to some OS newer than 3.2... and still have CAS on my non CAS. That's great news !!

I never tried to kiss a parrot, but a big hug should be enough