Julia Explorer 1.0a
Actions
Vote :
ScreenshotAperçu
Informations
Catégorie :Category: Utilitaires TI-Nspire
Auteur Author: Sly
Type : Assembleur nécessitant un kernel
Taille Size: 196.83 Ko KB
Mis en ligne Uploaded: 01/02/2021 - 17:08:25
Mis à jour Updated: 01/02/2021 - 17:09:23
Uploadeur Uploader: SlyVTT (Profil)
Téléchargements Downloads: 46
Visibilité Visibility: Archive publique
Shortlink : http://ti-pla.net/a2696012
Type : Assembleur nécessitant un kernel
Taille Size: 196.83 Ko KB
Mis en ligne Uploaded: 01/02/2021 - 17:08:25
Mis à jour Updated: 01/02/2021 - 17:09:23
Uploadeur Uploader: SlyVTT (Profil)
Téléchargements Downloads: 46
Visibilité Visibility: Archive publique
Shortlink : http://ti-pla.net/a2696012
Description
Julia Set Fractal Explorer - for Ti nspire CX II-T
A simple programme to explore the Julia set : Zn+1 = Zn²+C
with possibility to change C=a+b.i.
Keys are :
* Iteration steps : min is 16 (quick) - max is 256 (slow) - default is 256
- 8 to decrease maximum possible iterations
- 9 to increase maximum possible iterations
* Sizes of pixel blocks : min is 1x1 (slow) - max is 5x5 (quick) - default is 1x1
- 5 to decrease pixel block size
- 6 to decrease pixel block size
* Change the Julia Complex Constant C (default is 0 + 0i)
- KP_Up : increase imaginary part of C (+0.02i)
- KP_Down : decrease imaginary part of C (-0.02i)
- KP_Left : decrease real part of C (+0.02)
- KP_Right : increase real part of C (+0.02)
* Tab to toggle on screen parameter display
* Ctrl to reset default value and come back to the usual Julia C (0.285+0.01i)
* Esc to exit
A simple programme to explore the Julia set : Zn+1 = Zn²+C
with possibility to change C=a+b.i.
Keys are :
* Iteration steps : min is 16 (quick) - max is 256 (slow) - default is 256
- 8 to decrease maximum possible iterations
- 9 to increase maximum possible iterations
* Sizes of pixel blocks : min is 1x1 (slow) - max is 5x5 (quick) - default is 1x1
- 5 to decrease pixel block size
- 6 to decrease pixel block size
* Change the Julia Complex Constant C (default is 0 + 0i)
- KP_Up : increase imaginary part of C (+0.02i)
- KP_Down : decrease imaginary part of C (-0.02i)
- KP_Left : decrease real part of C (+0.02)
- KP_Right : increase real part of C (+0.02)
* Tab to toggle on screen parameter display
* Ctrl to reset default value and come back to the usual Julia C (0.285+0.01i)
* Esc to exit
